Arms ModuleSub-assembly C (A + B)

Step 9B: Attach the Shaft Mount

Align Part 300_06B with the motor shaft and secure it with threadlocked bolts.

Parts needed

Part	Count
	1
M4x20 Socket Bolt	6

Take Part and align the 6 holes with the motor shaft holes.

Take 6 – M4x20 Socket Bolts and lightly tighten each one in the hole to align the part.

Once the part is aligned, remove each M4x20 flat bolts, put thread locker on them, and tighten them back in, and then repeat for the next bolt.

How is this guide?

Step 9A: Attach the Joint Plate

Align Part 300_05A with the housing seam and fasten it around the motor shaft.

Steps 10-11: Skip the Inserts

Skip Steps 10-11 because no inserts are required at this stage.