Arms ModuleSub-assembly C (A + B)
Step 8B: Secure the Opposite Side
Attach Part 300_01A to the motor shaft and Sub Assembly A with threadlocked bolts.
Parts needed
| Part | Count |
|---|---|
| 1 | |
| M4x12 Flat Bolt | 5 |
| M3x16 Flat Bolt | 6 |
Instructions
Now we flip the entire sub assembly on the opposite side, with the motor shaft facing upward for Sub Assembly B.
We take Part and then align the 6 holes arrange in a circle with 6 holes on the motor shaft.
Take 6 – M3x16 flat bolts and then lightly tighten them in the 6 holes arrange in a circle on Part to the motor shaft.
Then we align the 5 holes arranged in a moonshape on Part with the 5 holes on the Sub Assembly A.
Take 5 – M4x12 flat bolts. One by one insert into the whole and lightly tighten it until all the bolt is in place and part is aligned.
Once the part is aligned, untighten each M4x12 (Step 12) flat bolt and M3x16 (Step 10) one by one, apply the threadlocker to the bolt, then tighten them back in place all the way to secure all the part together
How is this guide?