Arms ModuleSub-assembly B
Step 6: Secure the Motors
Align and fasten both motors to Part 300_14C with threadlocked bolts.
Parts needed
| Part | Count |
|---|---|
| M3x10 Flat Bolts | 6 |
| M4x8 Socket Bolts | 3 |
Instructions
Put 6 – M3x10 Flat Bolts into the 6 holes on the surfaces of Part , tighting it lightly to align the motor with the shell, after the part aligned, you can tighten all the bolt
You can now also tighten the 3 bolt we have put in place in Step 4 around the circumference of the part. Don’t over tighten it, it is just meant to secure the motor in place.
Align the holes on the motor EC-A3814-H14-107 (ID 15) with the three hole at the bottom of the long end of Part .
Put 3 – M4x8 Socket Bolts into the three hole and secure them in place lightly, to align the part.
After the part is aligned, remove the bolt one by one, put on the threadlock, then tighten all the bolts.
How is this guide?