Step 6: Install the Outer Housing
Enclose the assembly with part 500_04C and secure it with 17 bolts.
Parts needed
| Part | Count |
|---|---|
| Current assembly from Step 5 | 1 |
| 1 | |
| M4x14 Socket bolt | 17 |
| Threadlocker | As needed |
Instructions
Take the current assembly and lay it flat on the surface such that part is facing upward toward the ceiling and toward you.
Take part and prepare to align to as shown below.
Slide part into the current assembly and make sure that the holes on part are aligned with the threaded insert on part .
Position the assembly such that part is facing you. You should see 9 holes on parts . Take 9 – M4x14 Socket bolts and lightly tighten them into the holes on parts to align the part to the threaded insert on part .
Turn the whole assembly around 180 degree such that part is now facing downward. Take 8 – M4x14 socket bolts and lightly tighten them into the holes on parts to align the part to the threaded insert on part .
After the parts are aligned:
- remove each of the 17 – M4x14 Socket bolts,
- apply threadlocker,
- then tighten them back to secure part and part together.
How is this guide?