Step 6: Attach the Arm Modules
Attach the completed left and right arm modules to the torso shell with mounting plates 100_05A and 100_08A and 24 M4x45 socket bolts.
Parts needed
| Part | Count |
|---|---|
| Torso assembly from Step 4 | 1 |
| Completed Left Arm Module | 1 |
| Completed Right Arm Module | 1 |
| left mounting plate | 1 |
| right mounting plate | 1 |
| M4x45 socket bolts (carried with arm modules) | 24 |
| Threadlocker | As needed |
Instructions
Set up part such that the neck is facing the ceiling and the waist is facing the ground.
Take part and align it with the left arm hole from the inner side of part . Then, take the left arm module and align all the 12 - M4x45 socket bolt with and . Lightly tighten all the socket bolt to secure all the parts together.
After the parts are aligned:
- remove each of the 12 – M4x45 socket bolts in a star formation,
- apply threadlocker,
- then tighten them back to secure Part and part and the Left Arm Module together.
Take part and align it with the right arm hole from the inner side of part . Then, take the right arm module and align all the 12 - M4x45 socket bolt with and . Lightly tighten all the socket bolt to secure all the parts together.
After the parts are aligned:
- remove each of the 12 – M4x45 socket bolts in a star formation,
- apply threadlocker,
- then tighten them back to secure Part and part and the Right Arm Module together.
How is this guide?