AssembleRight Leg ModuleThigh Assembly
Step 6: Install the Outer Housing
Enclose the assembly with part 500_04C and secure it with 17 bolts.
Parts needed
| Part | Count |
|---|---|
| Current assembly from Step 5 | 1 |
| 1 | |
| M4x14 Socket bolt | 17 |
| Threadlocker | As needed |
Instructions
Take the current assembly and lay it flat on the surface such that part is facing upward toward the ceiling and toward you.
Take part (it should have 8 holes, not to confuse with part ) and prepare to align to as shown below.
Take 8 – M4x14 socket bolts and lightly tighten them into the holes on parts to align the part to the threaded insert on part .
Take part (it should have 9 holes) and prepare to align to as shown below.
Take 9 – M4x14 Socket bolts and lightly tighten them into the holes on parts to align the part to the threaded insert on part .
After the parts are aligned:
- remove each of the 17 – M4x14 Socket bolts,
- apply threadlocker,
- then tighten them back to secure part and part together.
How is this guide?