Step 8: Install the RPU and Connect Its Cable Connectors
Mount the RPU in the torso and connect the pelvis, shoulder, and neck cable connectors to their labeled RPU ports.
Parts needed
| Part | Count |
|---|---|
| Integrated torso and pelvis assembly from Step 7 | 1 |
| RPU assembly | 1 |
| RPU mounting bolts | 4 |
| Double-ended XT30 (2+2) cable - 400mm | 2 |
| Pelvis cable connectors | 3 |
| Neck yaw cable connector | 1 |
Instructions
Take the RPU set up and inserted it into the bottom of part . Secure it with 4 bolts on the side.
Connect each of the three pelvis cable connectors to its corresponding labeled RPU port.
Connect one connector of each 400 mm double-ended XT30 cable to the specified port on right shoulder pitch actuator ID 18 and left shoulder pitch actuator ID 13. Route the free connectors and the neck yaw cable connector through the side cable cutout in part , then connect each connector to its labeled RPU port.
How is this guide?
Step 7: Attach the Torso to the Pelvis
Secure the torso waist plate to waist yaw actuator ID 23 on the completed pelvis module with six M4x20 socket bolts.
Step 9: Install the Neck Pitch Actuator and Head Base
Attach bracket 700_02B to neck yaw actuator ID 24, install neck pitch actuator ID 25, and secure head base 700_03C.